Used - Bright Focusing Screen for Rolleiflex 6000/Hy6/SL66 cameras with Grid lines and micro-prism collar and split prism rangefinder.
These screens were offered by Rolleiflex in the past, but are no longer available new. They were standard in some 6000 series models, but work in all 6000 series, Hy6, SL66, etc.
The large micro-prism area works by shimmering while out of focus and then becoming clear when in focus. A split prism in the very center is also helpful. These screens are bright compared to many but maybe 1/2 stop darker than the 1st gen High D and 1 stop darker than the latest High D (and Maxwell) screens but because of the very large micro-prism area still very useable. Some people prefer to focus with the microprism.
Condition is Excellent except for the "ok" mark on the bottom right - this was used in camera calibration and QC marked the screen good for use. Doesn't bother me, but see it in the picture. The picture of the screen in my 6008AF body is the actual screen being sold. The screen is packaged in the plastic clamshell case in the 2nd picture.
Note: The screen will NOT fit your older TLR camera - but it will fit the following cameras:
SL66 - all models
6001, 6002, 6003, 6006, 6008 all models
Hy6, Hy6 Mod2 all models
Panshot and Rollei made sliding back adapters for X-Act2
Tips: Focus screens are easily damaged. Please hold only by the edges. Installation is by carefully pulling back the screen frame and lifting up. The screen will slide into the frame behind the little finger tabs. Most reflective side faces up toward you, the most diffuse side down toward the mirror. Never try to wash the focusing screen. You will not need to calibrate your camera by changing the focus screen. You can have several and use the one best suited for the job.