s

Franke und Heidecke

Used: Focusing Screen for Rolleiflex 6000/Hy6/SL66 cameras with large central diffusion spot

$100.00

Franke und Heidecke

Used: Focusing Screen for Rolleiflex 6000/Hy6/SL66 cameras with large central diffusion spot

$100.00

Cat. No. Used-FS-2020-22

Used:  Focusing Screen for Rolleiflex 6000/Hy6/SL66 cameras with large central diffusion spot

I'm not certain of the maker of this screen, but it's not an OEM screen, nor is it a Maxwell screen.   It has only a large central diffusion circle like some of the Rolleiflex SL 66 cameras were originally fitted with.  The center patch area does not have any microprism affect - but is brighter than the outer areas.  Does have a fresnel on top side so is a modern screen, not an older screen. Less bright than a High D screen except in center area.  

Condition is excellent. 

The picture of the screen in my 6008AF body is the actual screen being sold.  The screen is packaged in the plastic clamshell case in the 2nd picture.  

Note: The screen will NOT fit your older TLR camera  it's for SLR Rolleiflex's - it will fit the following cameras:

Fits:

  • SL66 - all models
  • 6001, 6002, 6003, 6006, 6008 all models
  • Hy6, Hy6 Mod2 all models
  • Panshot and Rollei made sliding back adapters for X-Act2
  • GX, FX, FW, FT (modern Rolleiflex TLR's)

Will NOT fit

  • 2.8E, 2.8F, 3.5E, 3.5F, C's, D's, Automats, Rolleicords, most older TLR's.

Tips: Focus screens are easily damaged. Please hold only by the edges.  Installation is by carefully pulling back the screen frame and lifting up.  The screen will slide into the frame behind the little finger tabs.  Most reflective side faces up toward you, the most diffuse side down toward the mirror.  Never try to wash the focusing screen. You will not need to calibrate your camera by changing the focus screen.  You can have several and use the one best suited for the job.  

Focusing screens are sold as is, not returnable